Silicone Sealant CLEAR 2.8oz Tube (80ml)

502/80ML Industrial Silicone Sealant/Adhesive is a one-part, moisture-curing RTV (room temperature vulcanizing) silicone that cures to a strong, silicone rubber that maintains long-term durability and flexibility. 502/80ML is a non-slump sealant and can be applied to vertical or overhead surfaces without flowing or sagging. Because 502/80ML is a 100% silicone sealant, it has excellent resistance to weathering including ozone, ultra-violet radiation, freeze-thaw conditions and airborne chemicals.
Fully cured, 502/80ML has excellent adhesion to glass, metal, porcelain, ceramic, wood, most plastics and many other nonporous substrates.
502/80ML can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -70 to +400 degrees F.

Features & Specifications
502/80ML is an excellent sealant and/or adhesive for many industrial applications where a long-term, permanently flexible bond or seal is required. Such applications include: formed-in-place gaskets for axle housings, differentials, junction box covers, etc. adhering appliance trim and sealing appliance parts adhering name plates, letters and signs sealing joints in ductwork sealing truck trailers, cabs, marine portholes and cabins sheet metal skylights Sealing aquariums
General Sealing: Food service installations, walk-in refrigerators, trailers, engine components, seal and waterproof, coaxial cable connectors, weatherize switch parts and instrument mountings.

Directions:
502/80ML is ready to use and requires no mixing or additives. The cure mechanism begins as soon as the sealant comes in contact with the air.
At conditions of 25°C(77°F) and 50% relative humidity, the sealant will skin in 10 minutes and fully cure in 24 hours (1/8 bead) and reaches its maximum adhesion in 7 days. Higher humidity accelerates cure. Tooling, if necessary, should be done before skinning takes place.